Your cart is currently empty!
Nitrile Examination Gloves
- Nitrile gloves are made from acrylonitrile-butadiene rubber. This synthetic rubber has higher puncture resistance than latex gloves, as well as greater tactile sensitivity.
- Nitrile gloves were created to address common issues with natural rubber latex gloves, such as allergic reactions and a lack of solvent protection.
- Nitrile gloves are used in a variety of settings, including industrial, residential and healthcare. They are popular with healthcare professionals, dentists, estheticians, laboratory workers, food and chemical handlers, and workers performing general industrial duties.
Description
PRODUCT SPECIFICATION
Nitrile Powder Free Examination Gloves Palm Textured
SECTION I : PRODUCT DESCRIPTION
| 1. 1 | Type | Nitrile Examination Glove, Powder Free, Online Single Chlorinated, Non sterile |
| 1. 2 | Material | 100% Synthetic Nitrile Latex |
| 1. 3 | Colour | Blue |
| 1. 4 | Design & Features | Ambidextrous, palm textured, beaded cuff |
| 1. 5 | Powder | No powder lubricant added |
| 1. 6 | Storage Condition | The gloves shall maintain their properties when stored in a dry condition. Avoid direct sunlight |
| 1.7 | Shelf Life | The gloves shall have shelf life of 5 years from the date of manufacture with the above storage condition |
| 1. 8 | Packing Style | 100 pcs gloves x 10 dispensers x 1 carton |
| 1. 9 | Size Marking | The size of gloves shall be marked in the check box on every carton with black ink |
SECTION II: PERFORMANCE REQUIREMENTS | Sampling Plan : ISO 2859 Single Normal
| # | Characteristics | Inspection Level | Acceptable Quality Level | Reference Standard |
| 2.1 | Dimensions | S2 | 4.0 | ASTM D6319-19 |
| 2.2 | Physical Properties | S2 | 4.0 | ASTM D6319-19 |
| 2.3 | Freedom from Holes Air Pump Test | GI | 1.5 | In house practice |
| 2.4 i ii |
Visual Defects: Major Visual Minor Visual |
GI | 2.5 4.0 |
In house practice |
| 2.5 i ii iii |
Packaging Defects: Regulatory Visual Critical incl. Gloves Counting |
GI GI S2 |
** 4.0 4.0 |
In house practice |
| 2.6 | Powder Free Residue | N=5 | N/A | ASTM D6319-19 ASTM D6124-06 (2017) |
| 2.7 | Mix Size / Mix Glove / Mix Hand | Not Allowed | ||
**Unacceptable at any level
SECTION III: PERFORMANCE SPECIFICATION
Dimensions
| Description | Size | Standard |
| Length, mm | All Sizes | 300 +/- 10 |
| Palm Width, mm | XS S M L XL |
76 +/- 3 84 +/- 3 94 +/- 3 105 +/- 3 113 +/- 3 |
| Thickness, mm *single wall | All Sizes | Finger : 0.14 +/- 0.02 Typical value: 0.13 to 0.15 Palm : 0.10 +/- 0.02 Typical value: 0.10 to 0.11 |
Physical Properties
| Description | Standard | |
| Before Aging | After Aging | |
| Elongation at Break, % | Min 500 Typical value: 500 to 600 |
Min 400 Typical value: 400 to 500 |
| Tensile Strength, MPa | Min 14 Typical value: 14 to 18 |
Min 14 Typical value: 14 to 18 |
| 3.3 | Freedom from Holes: The sample size and allowable number of non conforming gloves in the samples shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements |
| 3.4 | Visual Defects: The sample size and allowable number of non conforming gloves in the samples for both major and minor defects shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements. |
| 3.5 | Packaging Defects: The Sample size and allowable number of non conforming in the samples for regulatory, visual and critical packaging defects shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements, Gloves Counting=100 pcs by count per Dispenser. |
| 3.6 | Powder Free Residue: Maximum 2 mg per glove |
PRODUCT SPECIFICATION
Nitrile Powder Free Examination Gloves Finger Textured
SECTION I : PRODUCT DESCRIPTION
| 1. 1 | Type | Nitrile Examination Glove, Powder Free, Online Single Chlorinated, Non sterile |
| 1. 2 | Material | 100% Synthetic Nitrile Latex |
| 1. 3 | Colour | Blue |
| 1. 4 | Design & Features | Ambidextrous, finger textured, beaded cuff |
| 1. 5 | Powder | No powder lubricant added |
| 1. 6 | Storage Condition | The gloves shall maintain their properties when stored in a dry condition. Avoid direct sunlight. |
| 1.7 | Shelf Life | The gloves shall have shelf life of 5 years from the date of manufacture with the above storage condition |
| 1. 8 | Packing Style | 100 pcs gloves x 10 dispensers x 1 carton |
| 1. 9 | Size Marking | The size of gloves shall be marked in the check box on every carton with black ink |
SECTION II: PERFORMANCE REQUIREMENTS | Sampling Plan : ISO 2859 Single Normal
| # | Characteristics | Inspection Level | Acceptable Quality Level | Reference Standard |
| 2.1 | Dimensions | S2 | 4.0 | ISO 11193-1:2020 |
| 2.2 | Physical Properties | S2 | 4.0 | ISO 11193-1:2020 |
| 2.3 | Freedom from Holes Water Tight Test | GI | 1.5 | ISO 11193-1:2020 |
| 2.4 i ii |
Visual Defects: Major Visual Minor Visual |
GI | 2.5 4.0 |
In house practice |
| 2.5 i ii iii |
Packaging Defects:
Regulatory |
GI GI S2 |
** 4.0 4.0 |
In house practice |
| 2.6 | Powder Free Residue | N=5 | N/A | ASTM D6319-19 ASTM D6124-06 (2017) |
| 2.7 | Mix Size / Mix Glove / Mix Hand | Not Allowed | ||
**Unacceptable at any level
SECTION III: PERFORMANCE SPECIFICATION
Dimensions
| Description | Size | Standard |
| Length, mm | All Sizes | 300 +/- 10 |
| Palm Width, mm | XS S M L XL |
76 +/- 3 84 +/- 3 94 +/- 3 105 +/- 3 113 +/- 3 |
| Thickness, mm *single wall | All Sizes | Finger : 0.13 +/- 0.02 Typical value: 0.11 to 0.12 Palm : 0.10 +/- 0.02 Typical value: 0.08 to 0.09 |
Physical Properties
| Description | Standard | |
| Before Aging | After Aging | |
| Force at Break , N | Min 7 Typical value: 7 to 11 |
Min 6 Typical value: 7 to 10 |
| Elongation , % | Min 500 Typical value: 500 to 700 |
Min 400 Typical value: 400 to 600 |
| 3.3 | Freedom from Holes: The sample size and allowable number of non conforming gloves in the samples shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements. |
| 3.4 | Visual Defects:The sample size and allowable number of non conforming gloves in the samples for both major and minor defects shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements. |
| 3.5 | Packaging Defects: The Sample size and allowable number of non conforming in the samples for regulatory, visual and critical packaging defects shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements Gloves Counting=100 pcs by count per Dispenser. |
| 3.6 | Powder Free Residue: Maximum 2 mg per glove |
PRODUCT SPECIFICATION
Nitrile Powder Free Examination Gloves Palm Textured (short cuff)
SECTION I : PRODUCT DESCRIPTION
| 1. 1 | Type | Nitrile Examination Glove, Powder Free, Online Single Chlorinated, Non sterile |
| 1. 2 | Material | 100% Synthetic Nitrile Latex |
| 1. 3 | Colour | Blue |
| 1. 4 | Design & Features | Ambidextrous, palm textured, beaded cuff |
| 1. 5 | Powder | No powder lubricant added |
| 1. 6 | Storage Condition | The gloves shall maintain their properties when stored in a dry condition. Avoid direct sunlight. |
| 1.7 | Shelf Life | The gloves shall have shelf life of 5 years from the date of manufacture with the above storage condition. |
| 1. 8 | Packing Style | 100 pcs gloves x 10 dispensers x 1 carton |
| 1. 9 | Size Marking | The size of gloves shall be marked in the check box on every carton with black ink. |
SECTION II: PERFORMANCE REQUIREMENTS | Sampling Plan : ISO 2859 Single Normal
| # | Characteristics | Inspection Level | Acceptable Quality Level | Reference Standard |
| 2.1 | Dimensions | S2 | 4.0 | ASTM D6319-19 |
| 2.2 | Physical Properties | S2 | 4.0 | ASTM D6319-19 |
| 2.3 | Freedom from Holes Air Pump Test | GI | 1.5 | In house practice |
| 2.4 iii |
Visual Defects: Major Visual Minor Visual |
GI | 2.5 4.0 |
In house practice |
| 2.5 iii iii |
Packaging Defects: RegulatoryVisualCritical incl. Gloves Counting |
GI GIS2 |
**
4.0 |
In house practice |
| 2.6 | Powder Free Residue | N=5 | N/A | ASTM D6319-19 ASTM D6124-06 (2017) |
| 2.7 | Mix Size / Mix Glove / Mix Hand | Not Allowed | ||
**Unacceptable at any level
SECTION III: PERFORMANCE SPECIFICATION
Dimensions
| Description | Size | Standard |
| Length, mm | All Sizes | 300 +/- 10 |
| Palm Width, mm | XS
S M L |
76 +/- 3 84 +/- 394 +/- 3 105 +/- 3113 +/- 3 |
| Thickness, mm *single wall |
All Sizes | Finger : 0.14 +/- 0.02 Typical value: 0.13 to 0.15 Palm : 0.10 +/- 0.02 Typical value: 0.10 to 0.11 |
Physical Properties
| Description | Standard | |
| Before Aging | After Aging | |
| Elongation at Break, % | Min 500 Typical value: 500 to 600 |
Min 400 Typical value: 400 to 500 |
| Tensile Strength, MPa | Min 14 Typical value: 14 to 18 |
Min 14 Typical value: 14 to 18 |
| 3.3 | Freedom from Holes: The sample size and allowable number of non conforming gloves in the samples shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements. |
| 3.4 | Visual Defects: The sample size and allowable number of non conforming gloves in the samples for both major and minor defects shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements. |
| 3.5 | Packaging Defects: The Sample size and allowable number of non conforming in the samples for regulatory, visual and critical packaging defects shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements Gloves Counting=100 pcs by count per Dispenser. |
| 3.6 | Powder Free Residue:Maximum 2 mg per glove |
PRODUCT SPECIFICATION
Nitrile Powder Free Disposable Gloves Finger Textured (short cuff)
SECTION I : PRODUCT DESCRIPTION
| 1. 1 | Type | Nitrile Disposable Glove, Powder Free, Online Single Chlorinated, Non sterile |
| 1. 2 | Material | 100% Synthetic Nitrile Latex |
| 1. 3 | Colour | Blue |
| 1. 4 | Design & Features | Ambidextrous, finger textured, beaded cuff |
| 1. 5 | Powder | No powder lubricant added |
| 1. 6 | Storage Condition | The gloves shall maintain their properties when stored in a dry condition. Avoid direct sunlight. |
| 1.7 | Shelf Life | The gloves shall have shelf life of 5 years from the date of manufacture with the above storage condition. |
| 1. 8 | Packing Style | 100 pcs gloves x 10 dispensers x 1 carton |
| 1. 9 | Size Marking | The size of gloves shall be marked in the check box on every carton with black ink. |
SECTION II: PERFORMANCE REQUIREMENTS | Sampling Plan : ISO 2859 Single Normal
| # | Characteristics | Inspection Level | Acceptable Quality Level | Reference Standard |
| 2.1 | Dimensions | S2 | 4.0 | ASTM D6319-19 |
| 2.2 | Physical Properties | S2 | 4.0 | ASTM D6319-19 |
| 2.3 | Freedom from Holes Air Pump Test | GI | 1.5 | In house practice |
| 2.4 i ii |
Visual Defects:
Major Minor Visual |
GI | 2.5
4.0 |
In house practice |
| 2.5 i ii iii |
Packaging Defects:
Regulatory |
GI GI S2 |
**
4.0 4.0 |
In house practice |
| 2.6 | Powder Free Residue | N=5 | N/A | ASTM D6319-19
ASTM D6124-06 (2017) |
| 2.7 | Mix Size / Mix Glove / Mix Hand | Not Allowed | ||
**Unacceptable at any level
SECTION III: PERFORMANCE SPECIFICATION
Dimensions
| Description | Size | Standard |
| Length, mm | All Sizes | Min 240 |
| Palm Width, mm | XS S M LXL |
76 +/- 3
84 +/- 3 105 +/- 3 113 +/- 3 |
| Thickness, mm *single wall |
All Sizes | Finger : 0.12 +/- 0.02 Typical value: 0.12 to 0.14 Palm : 0.08 +/- 0.02 Typical value: 0.08 to 0.09 |
Physical Properties
| Description | Standard | |
| Before Aging | After Aging | |
| Elongation at Break, % | Min 500
Typical value: 500 to 600 |
Min 400 Typical value: 400 to 500 |
| Tensile Strength, MPa | Min 14
Typical value: 14 to 18 |
Min 14
Typical value: 14 to 18 |
| 3.3 | Freedom from Holes: The sample size and allowable number of non conforming gloves in the samples shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements. |
| 3.4 | Visual Defects: The sample size and allowable number of non conforming gloves in the samples for both major and minor defects shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements. |
| 3.5 | Packaging Defects: The Sample size and allowable number of non conforming in the samples for regulatory, visual and critical packaging defects shall be determined in accordance to Sampling Plan ISO 2859-1 Single Normal using inspection and acceptable quality level as stated in Section II: Performance Requirements, Gloves Counting=100 pcs by count per Dispenser. |
| 3.6 | Powder Free Residue:Maximum 2 mg per glove |